XLE FIR v2.0 DSP Setting Notes 
11-24-10	MDK

These XLE-FIR v2.0 settings were created for use with the N8000 System Controller. Unlike the FIR_Drive settings, which are also available, these settings do not include the EV TEMP limiter. This feature is not yet available in the N8000. If you are using TG amplifiers with RCM-26 DSP modules or Dx46 processors please use the XLE FIR_Drive v2.0 settings. These settings can be identified by looking for P3000 0dBu in the sps file name. 

The XLE181FIR and XLE191FIR v2.0 presets are time-aligned to allow multi-pattern array creation. 

Subwoofers are time-aligned and level-adjusted to be flown in the same array. The subwoofer level is set for a 1/4 ratio of subwoofers to top boxes. Subwoofer output level and alignment delay may need to be adjusted for your application.

If you have other questions or comments about the settings, please contact EV Technical Support at:


Pro Audio - Technical Support Group 
Bosch Communications Inc
12000 Portland Ave S 
Burnsville MN  55337-1522
USA
 
Phone: 800-392-3497 
FAX:   952-884-0043 
Web:   www.boschcommunications.com 
 